GE Zenith - ZTGSE Series Transfer Switches - Service Entrance, Enclosed Only.
 Zenith is of the world leaders in emergency and standby power transfer solutions, Zenith keeps your power on. Zenith is committed to providing a full range of quality-driven products, backed by nationwide 24-hour service and support.

The switches in this group are designed for specific critical applications. They are utilized in industrial standard applications requiring dependability and ease of operation. These switches combine reliability, flexibility and ease of use in a rugged industrial package. All these switches work together with any remote-start generator that use two-wire control, allowing the standby power system to be fully automatic. Designed for specific applications, this Series builds on ZTS technology while providing a pre-engineered project solution.

The ZTS Series is the building block of our transfer switch product line including all the switches shown on this page. This ruggedly built power contactor family of switches has been specifically designed for transfer switch duty with dependability, versatility and user friendliness of prime concern. These special switches are available in NEMA enclosures to the customer’s specifications.

The Model SE expands the time-tested Series ZTG platform to serve more applications than ever before. While providing the functionality of an automatic transfer switch the ZTGSE integrates the utility main disconnect, optional transient voltage surge suppression and power monitoring into one simple coordinated package.

The ZTGSE provides greater protection to critical loads against utility power outages and transient voltage disturbances. This delivers more piece of mind to facility managers and business owners in a wide range of industries such as water/wastewater reclamation, retail, agricultural, light manufacturing, wireless communications and other service businesses.

ZTGSE switches are equipped with GE’s next-generation MX150 microprocessor panel, which controls the operation and indicates the status of the transfer switch’s position and available sources. As an embedded digital controller, the MX150 offers best-in-class performance utilizing an LCD display with statistical event recording and basic metering as standard features.

         General Information:

  • GE Zenith’s ZTGSE Series Transfer Switches are designed for emergency, critical and life support standby and prime power applications.
  • Standard models in stock, dropped shipped to your location. FREE SHIPPING when purchased with a generator!
  • Sizes include 40 to 3,000 amps with 2, 3 or 4 pole configurations.
  • Available 120/240 VAC, 120/208 VAC, 277/480 VAC and other voltages up to 600 VAC. See Factory Brochure under Additional Information.
  • Switch is true double throw, mechanically interlocked and mechanically held, electrically operated utilizing a reliable, field-proven single solenoid operator.
  • Switch mechanism absolutely prohibits connecting both sources together. Cannot be over-ridden.
  • Available in standard or delayed transistion configurations.
  • Available in NEMA Type 1 (indoor), 3R (outdoor) enclosures and open (back-panel mounted) configurations as well as NEMA 4, 4X & 12.
  • Dimensions shown on ZTS Dimensions under Additional Information.
  • GE Zenith’s ZTGSE switches are equipped with the MX150 control panel. This microprocessor control includes:
  • Under-voltage sensing (90% pickup, 80% dropout) of Source 1 (normal).
  • Voltage and frequency sensing of Source 2 (emergency), (90% voltage, 95% frequency pickup).
  • Time Delay Engine Start (P) - 0-10 seconds, factory setting 3 seconds.
  • Time Delay Engine Warm-up (W) - Transfer to Emergency (Source 2) - 0 -5 minutes, factory setting 1 second.
  • Time Delay Utility Stabilization/Retransfer to Utility (Source 1) (T) - 0-60 minutes, factory setting 30 minutes.
  • Time Delay Engine Cool Down (U) - 0-60 minutes, factory setting 5 minutes.
  • Generator exerciser timer built-in. 365 day adjustable time setting. Factory set at 7 days. Exercises Source 2 with or without load.
  • Switches feature contacts that are easily accessible for easy inspection and preventive maintenance.
  • Rated for standby applications and intended for use only in optional (non-critical) standby systems in accordance with the National Electrical Code. NEC/NFPA 70, Article 702.
  • Not intended for emergency or life-support systems.
  • Meets NEC requirements for use as Service Entrance Equipment.
  • Qualified and listed to
    • UL 1008, CSA 22.2 and IEC, 480 VAC 50/60 Hz for automatic transfer equipment standards.
  • Fully approved for UL891, UL 1449 (with TVSS feature
    •
  • For technical data, dimensions, features, remote controls, monitoring, warranty and other information. See Additional Information below.

We recommend ZTS switches when purchasing any standby or primary power generator systems. If you require less features or a lower price point then this series, See the ZTG series, See GE Zenith, ZTG & ZTGDT, Residential, Commercial & Industrial Transfer Switches. If you require a switch that will handle large motor loads or inductive loads (without special closures and bypasses, See GE Zenith, ZTS Industrial Automatic Transfer Switches, Service Entrance. For Residential and commercial applications, See GE Zenith, ZTX Light Duty Residential & Commercial Transfer Switches. For ZTSCT Closed Transition, ZBTS Automatic Transition Bypass, ZBTSD Delayed Transition Bypass and ZBTSCT Closed Transition Bypass, See GE Zenith, ZTSCT, ZBTS, ZBTSD & ZBTSCT, Industrial Automatic Transfer Switches. Prices and the most common accessories are online on this website for all models.

 
CALL FOR PRICING: Due to the extensive array of types, options and accessories please contact the GeneratorJoe sales department for competitive pricing. Call GeneratorJoe at 707 539-9003 or write sales@generatorjoe.net.